RUS | ENG          Register | Log in | Bookmark | FAQ | Add to cart
You are not logged in
 
  Products   Companies   All  
 
 
 

PEXstone hammer crusher

«Back
Help
   
PEX stone hammer crusher are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. The crushing compressive strength of materials should not be in excess... more...
 
 
«Make RFQ
Detailed Product Information
Offers in Marketplace 1
«Buy
   
Product Name: PEXstone hammer crusher
Category: Roll crushers
Go to Marketplace
Supplier: Shandong China Coal Group
Manufacturing
Country:
China
Manufacturer: China Coal
Supplier Product Number: Crusher
Product Subtype: New product
PEXstone hammer crusher
PEX stone hammer crusher are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. The crushing compressive strength of materials should not be in excess of 150Mpa. The hammer crusher is mainly used in such industries as cement, coal separation, electricity generation, building mate.

Product Introduction
PEX stone hammer crusher are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. The crushing compressive strength of materials should not be in excess of 150Mpa. The hammer crusher is mainly used in such industries as cement, coal separation, electricity generation, building mate.
Main Characteristics
Hammer crusher (hammer mill) is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. The PC-Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining,coal, metallurgic, construction material, road building, and chemical industries. the maximum, compressive resistance of the crushed materials can be up 150Mpa.
Operating Principle
Hammer crusher is the main working parts with a hammer (also known as hammer) of the rotor. Rotor from the spindle, disk, pin and hammer components. Motor drives the rotor speed in crusher cavity rotation. Material from the upper feed inlet into the machine, by the high-speed movement of the hammer blow, impact, shear, abrasive and grinding. In the lower part of the rotor, with sieve, crushing in less than sieve size fractions excreted through the sieve, sieve size larger than the coarse-grained material in the sieve retention continue to be a hammer blow and cut, and finally through sieve from the plane.
Technical Parameters
Type Rotor speed(r/min) Inlet size(mm) Maximum feed size(mm)
Out size (mm) Capacity (t/h) Power(kw) Weight (t)
DimensionsL×W×H(mm)
Φ400×400 1500 145×450 100 0-30 5-8 7.5 0.9 844×942×878
Φ600×400 1000 295×450 100 0-35 10-12 18.5 1.03 1054×972×1117
Φ600×600 1000 295×570 100 0-35 12-18 45 2.14 1315×840×1501
Φ800×600 1000 350×570 120 0-45 20-25 55 2.45 1515×2586×1040
Φ800×800 1000 350×850 120 0-45 35-45 55 3.05 1515×2831×1040
Φ1000×800 1000 580×850 200 0-45 25-40 110 6.5 3206×2210×1515
Φ1600×1600 600 1500×1785 350 0-60 220-280 450 22.8 3350×3120×2660

 
 
about us
terms and conditions
privacy policy
b2b sites
reciprocal links
contact us
site map